* Note: Some companies have introduced a very low loading and gradient loading system, as well as a low-volume hopper profile to reduce the amount of sheet consumed, the production of a rail system with very poor spectacle characteristics and low maintenance without preserving , The lack of use of the gearbox at the top and cost for the horizontal space of the upper part and the installation of the engine in the bottom of the rail system, loading solids and .... In this case, some of the solids will not enter into the mixer when it falls into the mixer, and it will not be fully loaded, and will slow down due to the poor profile of the rails. The loaded angle should be between and degrees in the rail system. For example, in order to load at a height of meters, the mixer should have an angle of meters and should be used with a heavy -stroke

All production lines of standard artificial stone of nano-cement plast can produce fences, slabs, latticework and carvings, Roman columns and faces, stone inscriptions, decorative stones, etc. with the technology of GFRC, PFRC, EV PFRC and Acrylic PFRC Have. Due to the differences in the method of manufacture, as well as the difference in raw material and mixer contamination, it is not possible to use synthetic granite synthetic marble sinks and synthetic veneer sinks in the same way as corin, and to produce synthetic rocks Similar engineering of Coreen requires the equipment and space separate from the production line of artificial stone nano cement plast.

Artificial stones of nano-cement plast consist of a variety of minerals and minerals such as carbonate and silica, and also rocks and polished granules, binder minerals in accordance with the required standards, polymer materials to create physical and The appearance and direction of the control of the reaction processes during manufacture, as well as the nanoscale materials for controlling the process and creating special properties in the products, a very small amount of non-toxic chemicals, mineral pigments to color the products and with the properties of resistance to natural phenomena And acid rain and direct sunlight, and ... leading to the production of the new nano-semant-plá Set will be.

The method of installing nano-cement foam plasters is similar to the installation of ceramic. That is, a dry mortar layer is spread over the surface of the cement, and it is sprinkled on it with a cement slurry, and we plan to install the floors and align them. By creating a cement slurry, the kidneys cover the pores under the product and the rest of the slurry emanates from the flooring joints. By cleaning it, the product is simultaneously bonded.

Presentation of the production line and equipment for artificial stone, for the production of artificial flooring artificial stone engineering Similar to Coreen and Quartz cement base and polymer base, for the implementation of artificial stone engineering in the interior flooring, office centers, hospitals, yard floor and sidewalk, flooring Parking lots and ... with the ability to run on the project site