The issue of security with security glasses was not completely eliminated, because in case of attack in disturbances or thefts, these windows easily allow the intruders to break and pass. Also in the automotive industry, the insecurity of glass (especially windshield) in accidents has been a serious problem. Spanta Glass Glass Factory, as a glass manufacturer with the most up-to-date tools and experienced specialists, tries to improve the quality level of this product throughout the country. To buy laminated glass, you can get help from Spanta Glass with the most suitable price and the highest quality.

شرکت نوآوران شیشه سپنتا با سال سابقه در زمینه طراحی و تولید شیشه های ساختمانی میباشد . این مجموعه با ظرفیت تولید ۵ متر مربع شیشه در سال و با بهره گیری از مدرن ترین ماشین آلات و تیمی توانا و مجرب، طی سالیان متمادی سعی در ارتقا کیفی شیشه های ساختمانی داشته است. .

Any drilled holes must be the same size or greater than the thickness of your glass selected. (For example mm glass can only have a hole of mm in diameter or greater). Drilled holes must be within reasonable distance from edge of the glass or other holes / cut-outs to prevent breaking when toughened. A customer service representative will contact you regarding your exact requirements if needed.

Any drilled holes must be the same size or greater than the thickness of your glass selected. (For example mm glass can only have a hole of mm in diameter or greater). Drilled holes must be within reasonable distance from edge of the glass or other holes / cut-outs to prevent breaking when toughened. A customer service representative will contact you regarding your exact requirements if needed.

Annealed glass breaks easily. Although tempered glass is more strengthened than annealed glass, it breaks also under high stress or impact. Nevertheless laminated glass (V-Lam), which is composed of two glass layers and a PVB (Poly-Vynil Butyral) interlayer, benefits higher levels of impact resistance. A wide range of V-Lam glass can be produced by changing number of glass layers and interlayer thickness to meet different operational requirements.