در طول فرایند اجرا نیز محدودیت‌هایی وجود داشت، از جمله اینکه ساختار صنعتی و جداره‌های متشکل از ساندویچ‌پانل در پروژه، محدودیت‌هایی در انتخاب پوشش جداره‌های داخلی ایجاد می‌کرد که اثر مستقیم این عامل بر طراحی فضاها و عناصر داخلی، باید از ابتدا در نظر گرفته می‌شد. این در حالی است. که وجود مصالح بنایی در جداره‌های خارجی یک ساختمان باعث می‌شود که بتوان طیف گسترده از شیوه‌های اجرایی را برای پوشش جداره‌های داخلی در نظر گرفت.

Another point is to consider the various steps and the existing budget in the reconstruction of the building. In other words, you must be able to prioritize the reconstruction of different parts with high accuracy. For example, if the water pipes in your building are old and metal; It seems that parquet or stone and ceramic flooring of the building is not cost-effective before correcting the plumbing problems and ensuring their complete health. In another example, if the tiles in your kitchen and bathroom are old and unsuitable; It is better to think about the cabinets than to change them. Therefore, given the available budget, prioritize the basics; And then move on to additional items

پس از تثبیت جانمایی‌های اصلی، ریزفضاهای لازم به تناسب عملکرد هریک از فضاها تعریف شدند. در سالن غذاخوری، با توجه به اینکه عملیات پخت در آن انجام نمی‌شد، مساحت لازم برای آشپزخانه‌ای با امکانات مختصر جهت آماده‌سازی غذا، شامل اتاق ظرف‌شویی، کانتر گرم، یخچال و باکس‌های ذخیره، برنامه‌ریزی شد. در نمازخانه نیز برای تکمیل امکانات این فضا، فضای کفش‌کن به‌صورت مجزا، کمدهای پنهان برای نگهداری وسایل لازم، و محل قرارگیری تجهیزات صوتی تعریف شد. درب‌های برقی نیز که از گذشته در مجموعه وجود داشتند، برای کاهش هزینه‌ها، مجددا در طراحی ورودی سالن غذاخوری و سرویس بهداشتی مورد است.فاده قرار گرفتند.

This break area is located on the sixth floor of the headquarters on Beheshti Street. This floor includes a dining hall and a prayer hall, each with a capacity of about people, two toilets, a bathroom, a lobby, and a storage room. Client&#;s request for interior design and renovation of this area  were  an emphasis on enlivening the employees&#; rest space, design in accordance with the organization’s chart, and the least amount of disruption in the work schedules of other floors and daily commutes, during the construction phase.

In the status quo, the prayer hall was located on north-end, and the dining hall was located on south-end. Considering the direction of Qibla and the access to prayer hall, resulted in a long undesirable corridor which occupied a large area. Also, the positioning of the dining hall on south-end which resulted in unfavorable views to the roof and mechanical facilities, and its distance from the dishwasher room also needed to be redesigned. Requirements such as two main accesses from the north and south to the roof, maintaining the required area for each space according to the design specifications, and access to the utility room, also imposed their restrictions. Therefore, the first step in design was the rearrangement of spaces: the spatial organization. By switching the locations of the prayer hall and dining hall, more suitable access to the prayer hall, and a more beautiful view towards the northern mountains of Tehran, was achieved in the dining hall. The entrance lobby, located next to the elevator, provided access to other spaces, with a more appropriate geometry, and a more favorable area. In the end, due to the spatial limitations, the toilet was placed in the middle of these two spaces, and adjacent to the prayer hall.