The maximum length of each trunk is two meters, the trunks are with the door and inside each of them, there are conditions for creating a partition. The space of each trunk can be divided into one to four parts by partition. Wall trunking can be used in residential, office, and commercial buildings. The advantages of using wall trunking include the separation of electrical and network cables, the installation of electrical outlets, network and telephone on the trunk, and the possibility of adding and subtracting sockets.
از آنجایی که سیمکشی از داخل در بعضی از سازهها وجود ندارد و نمی توان دیوار را نیز تخریب کرد، بهتر است. که از ترانک است.فاده کرد. به این ترتیب داکت به صورت یک محفظه دارای درب است. که سیم و کابل را درون خود جای می دهد و قابلیت نصب کلید، پریز و ماژولار را نخواهد داشت.
This type of trunk can be used to install all high voltage and low voltage electrical systems, networks, and telephones. floor trunking is placed in the form of a built-in or under the Raised floor so that there is no view of the wires and cables. This type of trunk is placed on the floor so that only the lid of the box is visible. Another type of this trunk is visible trunking. This type of floor trunk has removable boxes. The advantages of this type of trunking include high security of cables, more resistance than other types of trunking, adding the number of sockets and cables, and rapid change in infrastructure. floor trunking is limited due to low usage and high price. Sizing, design, and color in this type of trunking differ according to the manufacturers standard. floor trunk is mostly used in high voltage electrical infrastructure with high cable volume.
Columnar trunking is used in spaces such as conference rooms, educational and office environments. This type of trunking is produced and supplied in the cube and circular designs and different colors (depending on the manufacturer). Using column trunking, you can assemble and manage your network, telephone, and power cables. The advantages of this type of trunking are the protection of cables from impact, rupture and decay, shortening of cables under the users desk, and availability. The length and size of the column trunking vary according to the manufacturers standard.
قبل از آنکه بخواهیم راجع به تفاوت داکت و ترانک صحبت کنیم، ابتدا باید بدانیم که اصلاً این دو قطعه چیستند و چه کاری انجام می دهند. داکت و ترانک برای ایجاد نظمدهی در مسیر کابلکشی است.فاده می شوند و سیم و کابل را در انواع متفاوت در این مسیر قرار می دهند.