If you happen to touch the metallic part at that moment you will be zapped. But if the metallic part of the appliance is earthed, the charge will be transferred to earth instead of accumulating on the metallic part of the appliance. Current don’t flow through earth wires in electrical appliances, it does so only when there is problem and only to direct the unwanted current to earth in order to protect us from severe shock.

To increase the safety factor of installation, two copper wires are used as earthing lead to connect the device metallic body to the earth electrode or earth plate. I.e. if we use two earth electrodes or earth plats, there would be four earthing leads. It should not be considered that the two earth leads are used as parallel paths to flow the fault currents but both paths should work properly to carry the fault current because it is important for better safety.

نحوه نصب به این صورت است. که ابتدا شما موقعیت و شرایط محیطی خود را از میان دو روشی که گفته می‌شود انتخاب کنید. دو روش موجود برای انجام ارتینگ عبارت می‌شوند از روش زمین عمقی و روش زمین سطحی که در ادامه به توضیح هر دو می‌پردازیم.

ارت بار مسی با پایه است.نلس‌استیل  وسیله‌ای است. کارآمد که در سیستم اتصال به زمین است.فاده می‌شود. ارت بارها نام‌های دیگری نیز دارند از جمله: باس‌بار ارت و ترمینال ارت. همچنین ارت بارت با یک اتصال جداگانه به‌صورت تکی یا دوگانه در دسترس بوده و در سیستم اتصال به زمین مورداستفاده قرار می‌گیرد.

In our electrical appliances, if excessive currents are not earthed, we would experience severe shock. Earthing takes place in electrical appliances only when there is a problem and it is to save us from danger. If in an electronic installation, a metallic part of an electrical appliance comes in direct contact with a live wire that results from maybe failure of installation or otherwise, the metal will be charged and static charge will accumulate on it.