Anti-moisture and anti-dust lamp In Varamin ( Sale )

Anti-moisture and anti-dust lamp-1
Anti-moisture and anti-dust lamp-2

Presentation of businesses
You can introduce your business services or products in this section.
For this purpose, be in touch with us.




- Housing, ABS and PC polycarbonate door and mask The special color scheme for traffic lights for working in open environments has been designed and manufactured. . The lantern consists of three separate houses connected by a special metal clamp and above And the bottom two lanterns for connecting to the traffic light mast with adjustable angles of view and passing through the cable that is attached to it with a special clamp. . Each house has a size of × mm mm The diameter of the lens is about mm, with ± °. . In the case of a full mask mask with a diameter of ± mm outside and a diameter of ± mm at the point of attachment to the lantern With a depth of ± which is connected to the body by a screw in the groove embedded on the body. . In the case of half-masked half-mask with a height of ± mm outside and ± ° at the point of attachment to the lantern at a depth of ± °, The hinges are attached to the body. . Each lantern&#;s house consists of the following parts: - &#; Body &#; &#; The door is hinged to the body and has a plastic strip to seal and place the lens and reflector. .. The lenses are transparent and have the same material as the PC or PMMA (a special grade for light bulbs and one hundred percent color), with excellent resistance to work in a free and warm environment, and with the addition The color consistency is provided for years in three colors: green, amber, and red, and sealed with a special plastic band with a lantern lid and secured with a special mount. -. Reflector for light bulb out to the door It is made of a PC with a special high-tech brush and has an internal surface with aluminum coatings (metallization) and ends with a chopper that is secured to it. . The lights are modular and can be mounted on each other from one to four . All parts are easily open, closed and replaced if necessary. . All moving parts that can penetrate the water or Trapped in the luminaire with elastic sealing gaskets, so as to ensure that the mounting strength does not allow water and dust to enter the lamp. . All dimensions and specifications of the optics are in accordance with the established European standards. &#; High-grade chopping knife is used in standard wiring of standard welders and completely unclogged principles that can not be connected or risk of electric shock. -Lighthouse stand (PC) with grid Special lanterns have been built. . Lanterns against minerals and highly acidic vapors. It is not able to change color from UV (sun rays). The lanterns are resistant to heat and cold, they have a thermal tolerance of ° to + ° C. . Lanterns are made of recyclable polymer materials and contaminated The environment does not come . &#; The mounting pins and their location to the lantern body are precisely molded in such a way that it allows accurate adjustment ( °) around the vertical axis for the best returns to be completely solid and non-removable, and so Do not apply any flexural or tensile stress to the lamp. . Brackets are arranged by a .-inch soldering wire in green, yellow, and yellow colors. The greenhouse, yellow, red and blue houses are connected to the terminal to the bottom of the house (green). . The lanterns have the ability to install the back plate. . In the case of three color lanterns, the lens color of the houses is respectively The bottom is up green, amber and red. . In the case of a yellow lantern, the lens is all three yellow amber houses. . In the case of red lanterns, the lens of all three houses is red. . In a variety of flashing lanterns of a kind Flashing with a suitable design for switching off at peak time and from high quality electronics and with a heat sink suitable for continuous operation in such a way as to be easy to install and replace. Can switch between and times in minutes, and has two symmetrical circuits for lanterns of two houses and three houses.- On all parts of the calendar of production, raw material, name and logo of the company Novarbartar carved .- For protective tests (dust and water) that are carried out in a validated laboratory in accordance with IEC, at least IP is accepted and the results of protective tests are available. . The quality and efficiency of the total light bulb is guaranteed for one year and for a minimum lifetime Designed and built for years.

As we&#;ve already mentioned, the first numerical value is for dust resistance. Like any device with IP or IP, that "" just means it&#;s dust resistant to a very high level, or is "dust tight", meaning no dust can get into the watch. The "X" means it doesn&#;t have an IP-rating against water, but that doesn&#;t mean it&#;s not water-proof - it&#;s just not tested to that standard.

چراغ هالوژن لنز دار ضدرطوبت و گرد و غبار وات پارس لایت با طراحی فوق باریک و نوردهی خوب، مناسب روشنایی مسکونی، اداری و مغازه‌ها است.. مدل این چراغ فکی و جهت تابش نور در آن خیلی آسان تغییرپذیر است.. با توجه به اینکه این مدل از طریق دو رشته سیم اتصال می‌یابد، نیازی به سوکت ندارد. طراحی باریک محصول، این موقعیت را فراهم کرده است. که بتوان از آن در تمامی فضاهای با محدودیت ارتفاع است.فاده کرد. با هدف تبادل حرارتی بهتر،‌ در ساخت محصول از هیت سینک آلومینیومی است.فاده شده است.. بدنه نیز از مواد PBT مقاوم در برابر حرارت است.. تمامی موارد گفته شده باعث شده است. تا لامپ هالوژنی پارس لایت از نظر کیفیت ساخت و طراحی چند پله بالاتر از برندهای دیگر باشد. ویژگی‌های خاص چراغ هالوژنی ال ای دی وات پارس لایت عبارتند از:



( Sale ) `s other In Varamin