To increase the overall efficiency of the boiler, the heat released from the combustion process must be properly transferred into the fluid used. Any heat that is not transferred to the fluid is lost through the body of the boiler or the flue gas. The temperature of the gas inside the chimney is a good indicator of the heat transfer process and therefore efficiency. There are practical limitations to the low flue temperature. Its temperature will be higher than the fluid used in the boiler. In boilers that do not do distillation, the temperature should be high enough that water vapor does not distill in the exhaust chimney and clean the heat transfer surface in the distillation that causes corrosion. Condensing boilers that use natural gas are made and designed with accessories that are resistant to corrosion. Also, their chimney temperature can be less than . degrees Celsius. Trapping heat distillation increases efficiency by more than %.

Je confirme que toutes les operations sous mentionnées ont étés réalisés avec succés. On vous félicite pour la professionnalité et le savoir faire que l’ing. Tarek Ibrahim a montré Durant son séjour à Tunis”.English translation: "I confirm that all the operations mentioned in summers have made successfully. We congratulate you on the professionalism and expertise that Eng. Tarek Ibrahim showed During his stay in Tunis

This type of pot or boiler is made up of connecting cast iron pieces called fins. Due to the ability to assemble and disassemble the cast iron boiler, it can be used in spaces where it is not possible to use a steel and integrated boiler. In fact, cast iron boilers are assembled and installed in the engine room. types of sections are used in the construction of each capacity of cast iron boilers, which are as follows.

In commercial complexes, natural gas is mostly used as fuel for engine room boilers because it is usually easily accessible, clean, and more economical than diesel and electricity. Some engine boilers are designed to use more than one type of fuel (usually natural gas and diesel). Dual-burner boilers provide extra gas for fuel outages. It also allows the consumer to use petroleum fuel (diesel) when the amount of natural gas reaches a peak. When the amount of natural gas is higher than other fuels, it is possible to save on fuel costs by using cheaper fuel and limiting the use of natural gas.

Eng. Shamel, I wanted to thank you and CATEC team as well for taking time from your busy schedule to support and help Americana meat KSA on all utilities projects (steam boilers, thermal oil heaters, etc). I kNow some of the work wasn’t part of your normal responsibilities, but your assistance was invaluable in helping my company get everything done in a very timely manner. Your expertise and enthusiasm were both appreciated during a time which can be stressful for all concerned! We sincerely appreciate your efforts and thank all CATEC team