Ventilation gas savings provide the best heat recovery opportunity. In boiler chimneys, there is a need for heat exchangers to transfer heat from the flue gas to the return water or to feed the boiler or combustion air. They even work well in boilers and operate at relatively low flue gas temperatures. There is a large room to recover some of the flue gas heat, which rises if the flue is not recovered. Saving gas from the chimney usually increases the overall efficiency of the boiler by to percent.
Leaks may occur in the hot water distribution system. This leakage increases the water and energy consumption of the system as well as the damage caused by the water leakage. Compensation water must be provided for the hot water and steam distribution system to replace the steam and water lost through the leak. This is an easy solution to ensure there is permanent water in the system. It is best to install a measuring device on the system compensation line. The measuring device should be checked weekly for unexpected system water loss.
The hot water produced by the boiler is pumped through pipes and reaches the building equipment, which can include hot water coils in the fan coils, hot water heating equipment and heating systems. Boilers produce steam that flows from high-pressure to low-pressure areas through pipes without the need for an external energy source, such as a pump. The steam used for heating can be used directly for steam-powered equipment, or through a heat exchanger can generate heat to produce hot water for the equipment.
Je confirme que toutes les operations sous mentionnées ont étés réalisés avec succés. On vous félicite pour la professionnalité et le savoir faire que l’ing. Tarek Ibrahim a montré Durant son séjour à Tunis”.English translation: "I confirm that all the operations mentioned in summers have made successfully. We congratulate you on the professionalism and expertise that Eng. Tarek Ibrahim showed During his stay in Tunis
The burner combines fuel and oxygen to create combustion conditions with the help of a combustion device. This combustion takes place in a combustion chamber and the heat generated is transferred to the heat exchanger water. The controls regulate the combustion process, the ignition rate of the burner, the required fuel, the amount of air required, the water temperature, the steam pressure and the pressure of the engine boilers.