Modular boilers are small in size and capacity and are usually used to replace several small boilers instead of one large boiler. These modular boilers pass through standard ports and are portable through stairs and elevators. These devices can be arranged in different order to make the most of small places or embed other equipment in those places. These boilers can efficiently provide the required heating load.
Steel boilers, as their name implies, are made of steel and are usually made of horizontal cylinders. Steel boilers have a combustion chamber in which pipes are placed around this chamber. The pipes that are installed around the combustion chamber of steel boilers are made of a special alloy so that they do not burn or damage in the face of a direct flame. These pipes are called (fire pipes). Steel boilers are divided into friends from the point of view of heat transfer, which are as follows.
Je confirme que toutes les operations sous mentionnées ont étés réalisés avec succés. On vous félicite pour la professionnalité et le savoir faire que l’ing. Tarek Ibrahim a montré Durant son séjour à Tunis”.English translation: "I confirm that all the operations mentioned in summers have made successfully. We congratulate you on the professionalism and expertise that Eng. Tarek Ibrahim showed During his stay in Tunis
Engine room boilers are high-pressure tanks designed to heat water or generate steam that can be used to heat the environment or to heat the building consuming hot water. In the heating of most commercial complexes, the source of heat for the engine room boiler are burners that work by burning natural gas. Diesel burners or fuel oil (rarely) can also be used. In some heating installations, the use of steam is preferred. Such as: absorption cooling systems, kitchens, laundries, disinfectants and steam-powered equipment.
Proper water hardening operations are essential to maintain the boiler operating properly. Each water hardening operation must be specifically planned and designed based on the minerals not dissolved in the compensating water, the percentage of distillation return, and the percentage of aeration. Insoluble solids in boiler water and water hardness in small and low-pressure motorhomes should be tested daily and in large and high-pressure motorhomes on an hourly basis. An annual inspection of boilers should include a thorough inspection and testing for signs of fouling or corrosion on surfaces adjacent to the water. The presence of even a thin layer of sediment prevents heat transfer and thereby reduces combustion efficiency. .