Consistent with SNIA technology, the production process for this product starting with the mixing of monomers as feedstock input to the reactors for polymer solution in Dimethylformamide (DMF) in the Chemical Area through to fiber production, drawing, finishing and packaging is continuous and that at each stage samplings and controls are conducted and finally the product is graded and released in accordance with the test results. Bright, dull and semi-dull products are normal products but colored, super-white and antibacterial products are customized. The product is packaged in bales weighing ± kg and then put in covered polypropylene jute and rod guards. The bales measure ** mm. - tons of this product can be transported in a -foot container.
جوشکاری چرخشی در جوش قطعات پلاستیکی با سطح مقطع دایره ای کاربرد دارد، به این صورت که دو قطعه در تماس با هم قرار گرفته و روی هم می چرخند تا آنکه انرژی گرمایی لازم توسط اصطکاک برای ذوب سطح جوش ایجاد شود؛ سپس با توقف چرخش، محل جوش تحت فشار سخت شده تا جوش بین دو قطعه شکل گیرد. دستگاه های اتومات جوش چرخشی وجود دارند که در آنها پارامتر های جوش مانند زمان و فشار به دقت کنترل می شوند و کل فرایند خودکار انجام می شود و دقت و کیفیت بالایی دارند.
لغت اسپاندکس (spandex) برگرفته شده از لغت expands است. و لفظی است. که در آمریکای شمالی و کانادا بیشترین کاربرد را دارد، در حالیکه در اروپا لغت الاستان (elastane) کاربرد دارد و نزدیکترین لغت برای توصیف ساختار شیمیایی آن است. و در کشورهایی مانند انگلستان، ایرلند، پرتقال، اسپانیا، آمریکای لاتین، است.رالیا و نیوزلند لغت لایکرا (Lycra) است.فاده میشود.
All manmade fibers used in carpet and textile industries can be converted to Superwhite fibers by Gel-Dyeing using optical whiteners. All products are capable of being made Superwhite. Our acrylic fibers are produced using monomer acrylonitrile as the major monomer (over %), methylacrylate or vinyl acetate as the second comonomer (less than %) and a third comonomer for dyability, by Solution Polymerization and Wet Spinning using SNIA technology. In both dull and semi-dull product, Titanium Dioxide (max .%) is used. Also, in the process of production, the fibers are submerged in finish (finish of about .%) prior to packing. The following are some of the major characteristics of our products:
Consistent with SNIA technology, the production process for this product starting with the mixing of monomers as feedstock input to the reactors for polymer solution in Dimethylformamide (DMF) in the Chemical Area through to fiber production, drawing, finishing and packaging is continuous and that at each stage samplings and controls are conducted and finally the product is graded and released in accordance with the test results. Bright, dull and semi-dull products are normal products. The product is packaged in bales weighing ± kg and then put in covered polypropylene jute and rod guards. The bales measure ** mm. - tons of the product can be transported in a -foot container.