این خط که توسط شرکت Jwell توسعه داده شده است.، برای تولید ورق چند لایه سازگار با محیط زیست است. که به طور گسترده ای برای شکل دهی خلاء، ظرف و بسته بندی مواد غذایی سبز، انواع ظروف بسته بندی مواد غذایی مانند: سالور، کاسه، غذاخوری، ظرف میوه است.فاده می شود. ، و غیره.

Consistent with SNIA technology, the production process for this product starting with the mixing of monomers as feedstock input to the reactors for polymer solution in Dimethylformamide (DMF) in the Chemical Area through to fiber production, drawing, finishing and packaging is continuous and that at each stage samplings and controls are conducted and finally the product is graded and released in accordance with the test results. Bright, dull and semi-dull products are normal products. The product is packaged in bales weighing ± kg and then put in covered polypropylene jute and rod guards. The bales measure ** mm. - tons of the product can be transported in a -foot container. 

Like other manmade fibers, polyester fibers are produced using industrial methods and because of their properties are good substitutes for such natural fibers as cotton. This product is made by combining dimethyl terephthalate, monoethylene glycol or terephthalic acid (substitute for the raw material &#;dimethyl terephthalate&#;) in the vicinity of good catalysts. Titanium dioxide is used to make the product look semi-dull. Also, in the production process, the product is submerged in finish (of about .%) prior to packaging. The following are some of the major characteristics of this product.

در حال حاضر، خط اکستروژن ورق پت تهویه‌شده بدون خشک‌کن دوقلو که توسط Suzhou Jwell راه‌اندازی شده است.، می‌تواند تکه‌هایی را با حداکثر محتوای آب اولیه ppm پردازش کند. علاوه بر این، افت ویسکوزیته در داخل . دسی لیتر بر گرم کنترل می شود.

All manmade fibers used in carpet and textile industries can be converted to Superwhite fibers by Gel-Dyeing using optical whiteners. All products are capable of being made Superwhite. Our acrylic fibers are produced using monomer acrylonitrile as the major monomer (over %), methylacrylate or vinyl acetate as the second comonomer (less than %) and a third comonomer for dyability, by Solution Polymerization and Wet Spinning using SNIA technology. In both dull and semi-dull product, Titanium Dioxide (max .%) is used. Also, in the process of production, the fibers are submerged in finish (finish of about .%) prior to packing. The following are some of the major characteristics of our products: