Like other manmade fibers, polyester fibers are produced using industrial methods and because of their properties are good substitutes for such natural fibers as cotton. This product is made by combining dimethyl terephthalate, monoethylene glycol or terephthalic acid (substitute for the raw material &#;dimethyl terephthalate&#;) in the vicinity of good catalysts. Titanium dioxide is used to make the product look semi-dull. Also, in the production process, the product is submerged in finish (of about .%) prior to packaging. The following are some of the major characteristics of this product.

در حال حاضر، خط اکستروژن ورق پت تهویه‌شده بدون خشک‌کن دوقلو که توسط Suzhou Jwell راه‌اندازی شده است.، می‌تواند تکه‌هایی را با حداکثر محتوای آب اولیه ppm پردازش کند. علاوه بر این، افت ویسکوزیته در داخل . دسی لیتر بر گرم کنترل می شود.

Consistent with SNIA technology, the production process for this product starting with the mixing of monomers as feedstock input to the reactors for polymer solution in Dimethylformamide (DMF) in the Chemical Area through to fiber production, drawing, finishing and packaging is continuous at that each stage, samplings and controls are conducted and finally the product is graded and released in accordance with the test results.

تمامی این روش ها در مرحله ی اول شامل اینترکشن میان مونومرها به منظور تولید پلیمر است.. زمانی که پلیمر تشکیل شد، طی فرآیندهای مختلف الیاف تشکیل میشوند. هم اکنون بیش از . درصد از الیاف اسپاندکس در دنیا به روش خشک محلول ریسی (solution dry spinning) تولید میشوند.

Our acrylic fibers are produced using monomer acrylonitrile as the major monomer (over %), methylacrylate or vinyl acetate as the second comonomer (less than %) and a third comonomer for dyability, by Solution Polymerization and Wet Spinning using SNIA technology. In both dull and semi-dull product, Titanium Dioxide (max .%) is used. Also, in the process of production, the fibers are submerged in finish (finish of about .%) prior to packing. The following are some of the major characteristics of our products: