در حال حاضر، خط اکستروژن ورق پت تهویهشده بدون خشککن دوقلو که توسط Suzhou Jwell راهاندازی شده است.، میتواند تکههایی را با حداکثر محتوای آب اولیه ppm پردازش کند. علاوه بر این، افت ویسکوزیته در داخل . دسی لیتر بر گرم کنترل می شود.
Licensed by E.I. Du Pont De Nemour based in the US, Acrylic Factory # has been producing Acrylic Fibers in Iran for three decades. The major monomers used in the production of acrylic fibers are acrylonitrile (AN), methylacrylate (MA) or vinyl acetate (VA). The acrylic fibers from Acrylic Fiber Factory # are produced using Slurry Polymerization and Dry Spinning. The fibers from Acrylic Factory # can be produced with a detex of .- dtex and a cut length of - mm and can also be produced variously on a customized basis. The factory is also capable of producing microdenier fibers. Good tenacity and uniform dyability are among their other outstanding characteristics. The production technology as well as the overall, physical and mechanical characteristics of the fibers is such that they have placed them in the Dralon products by Bayer, Germany. The following are some of the characteristics of our product:
اسپاندکس، لایکرا یا الاستان نوعی لیف مصنوعی است. که به دلیل خاصیت الاستیسیته ی خوبی که دارد بسیار مورد توجه است.. این لیف نوعی کوپلیمر است. که در سال توسط شیمیدانی به نام Joseph Shivers در شرکت دوپانت (DuPont) کشف شد. صرف نظر از روش است.فاده شده برای تولید اسپاندکس، ساختار شیمیایی محصول نهایی یکسان خواهد بود اما ممکن است. الفاظ مختلفی که برای این پلیمر به کار میرود سبب سردرگمی مصرف کنندگان شود.
به عنوان ماده اولیه برای تولید زنجیر اصلی این پلیمر از دو نوع پیش پلیمر ماکروگلایکول انعطافپذیر (flexible macroglycol) و دی ایزوسیانات سخت (stiff diisocyanate) می توان است.فاده کرد. این ماکروگلایکول می تواند پلی است.ر، پلی اتر، پلی کرنات و یا ترکیبی از آن ها باشد. پلیمرهای مطرح شده پلیمرهای بلند زنجیر با گروه های هیدروکسیل در دو انتهای خود هستند و مهمترین ویژگی آن ها بلند و انعطاف پذیری آن هاست. دی ایزوسیانات دارای زنجیر کوتاه تری بوده و در دو انتهای خود دارای گروه ایزوسیانات است. و همین باعث سختی آن میشود و است.حکام زنجیر را به دنبال دارد.
PET-GF Engineering Composite with a high molecular weight has a wide-ranging engineering application. As PET is reinforced with glass fiber, its mechanical, electrical, thermal and chemical properties as well as environmental, tolerance, creep, thermal expansion coefficient (like aluminum and brass) and, to a very large extent, extrusion capability improve. As the proportion of glass fiber and the production method (used in the production of extrusion parts and heat-deformable plates) vary, it has a wide range of applications. Among other things, it can be used in the production of household and automobile equipment requiring a high shock absorption structure, construction elements, case coating for such equipment as printers, copiers, cartridges, agricultural equipment including mowing machines, tractor engine cover, automotive spares, material transportation facilities such as palettes, crating, household equipment such as furniture as well as electrical and electronic equipment. Thanks to its very good dielectric properties, high thermal resistance and self-extinguishing characteristics, it is being increasing used in electrical, electronic, high temperature, spark-generation environments and direct-heat applications. Among other things, reference can be made to lamp-holders, cases and electrical sockets. Polynite is produced from polyester polymer compound combined with special-purpose glass fibers and other additives supplied in two versions: extrusion and compressive. The physical and chemical characteristics measured for the product are draw, bend, impact, pressure, MFI-IV and proportion of glass fibers.