Consistent with SNIA technology, the production process for this product starting with the mixing of monomers as feedstock input to the reactors for polymer solution in Dimethylformamide (DMF) in the Chemical Area through to fiber production, drawing, finishing and packaging is continuous at that each stage, samplings and controls are conducted and finally the product is graded and released in accordance with the test results.
دستگاه های جوش چرخشی- اصطکاکی شرکت KLN و Mecasonic مجهز به سروو موتور و تکنیک های مدرن کنترل بوده و بالاترین دقت و کارایی را در جوش قطعات با سطح مقطع دایره ای و متقارن ارائه می دهد. شرکت میلاد فراصوت همکاری نزدیکی با دو شرکت KLN آلمان و Mecsonic فرانسه داشته و آماده خدمت رسانی در زمینه تامین انواع تجهیزات جوش چرخشی می باشد.
در حال حاضر، خط اکستروژن ورق پت تهویهشده بدون خشککن دوقلو که توسط Suzhou Jwell راهاندازی شده است.، میتواند تکههایی را با حداکثر محتوای آب اولیه ppm پردازش کند. علاوه بر این، افت ویسکوزیته در داخل . دسی لیتر بر گرم کنترل می شود.
جوشکاری چرخشی در جوش قطعات پلاستیکی با سطح مقطع دایره ای کاربرد دارد، به این صورت که دو قطعه در تماس با هم قرار گرفته و روی هم می چرخند تا آنکه انرژی گرمایی لازم توسط اصطکاک برای ذوب سطح جوش ایجاد شود؛ سپس با توقف چرخش، محل جوش تحت فشار سخت شده تا جوش بین دو قطعه شکل گیرد. دستگاه های اتومات جوش چرخشی وجود دارند که در آنها پارامتر های جوش مانند زمان و فشار به دقت کنترل می شوند و کل فرایند خودکار انجام می شود و دقت و کیفیت بالایی دارند.
Anti-microbial fibers contain one or several activating agents capable of preventing the growth of or destroying microorganisms. Left in a polluted environment prone to microbial growth for a long time, antimicrobial fibers allow no microorganismic growth. In contrast, Leef = a small rough cloth bag used as a sponge in the bath left under similar conditions for some time would allow many microorganisms to grow on it. At Zayandeh Rood Fiber Company, there is also the customized option available to customer to order antimicrobial fibers with a variety of detexes. The fibers are used in blankets, socks, clothing, household textiles, hats, gloves, filters, sleeping bags, pillow covers, mattresses, etc. Our acrylic fibers are produced using monomer acrylonitrile as the major monomer (over %), methylacrylate or vinyl acetate as the second comonomer (less than %) and a third comonomer for dyability, by Solution Polymerization and Wet Spinning using SNIA technology. In both dull and semi-dull product, Titanium Dioxide (max .%) is used. Also, in the process of production, the fibers are submerged in finish (finish of about .%) prior to packing. The following are some of the major characteristics of our products: