با توجه به همسو بودن تولید سنگ های ساختمانی مصنوعی و مواد مورد نیاز جهت نصب ( چسب های ساختمانی ) و همچنین داشتن دستگاه های مورد نیاز تولید ، شرکت پردازشگران هونام اقدام به ارائه فرمولاسیون کامل چسب های ساختمانی بهمراه خط تولید سنگ مصنوعی سمنت پلاست نموده است. .

از معضلات نصب سنگ هاي آنتيک طبيعي و مصنوعي ميتوان به عدم يکسان بودن رنگ بندکشي با محصول نام برد. لذا این محصول جهت بندکشی بين فواصل سنگ های آنتیک طبیعی و مصنوعی در تنوع رنگ قابل ارائه به مشتریان می باشد. از ديگر محصولات ، پودر بند كشي آنتي باكتريال مي باشد كه جهت بندكشي سرويس هاي بهداشتي مناسب است..

As well as training the formula for the production of artificial stone of Cement Plast, with the ability to produce all kinds of flooring products of cement plast (antique mosaics), artificial stone antique plaster cement for interior and exterior decoration, stairs, table, cornice, artificial decorative artifacts - Filler and guillotine, also with the ability to produce various types of building adhesives, ductile and powder tile adhesives with nominal production capacity of - m in each working shift

* Note: Some companies have introduced a very low loading and gradient loading system, as well as a low-volume hopper profile to reduce the amount of sheet consumed, the production of a rail system with very poor spectacle characteristics and low maintenance without preserving , The lack of use of the gearbox at the top and cost for the horizontal space of the upper part and the installation of the engine in the bottom of the rail system, loading solids and .... In this case, some of the solids will not enter into the mixer when it falls into the mixer, and it will not be fully loaded, and will slow down due to the poor profile of the rails. The loaded angle should be between and degrees in the rail system. For example, in order to load at a height of meters, the mixer should have an angle of meters and should be used with a heavy -stroke

- But the volumetric mass is between and kg per cubic meter of synthetic stones that are ultra-light. But due to the use of certain materials in this type of product, the water absorption will be up to % (albeit by default and without the use of side materials), which are suggested for interior decoration. Unless they are added during the production of the relevant nanoscale material to reduce the water absorption of the outside of the building.