The method of installing nano-cement foam plasters is similar to the installation of ceramic. That is, a dry mortar layer is spread over the surface of the cement, and it is sprinkled on it with a cement slurry, and we plan to install the floors and align them. By creating a cement slurry, the kidneys cover the pores under the product and the rest of the slurry emanates from the flooring joints. By cleaning it, the product is simultaneously bonded.
In natural stones (especially current rocks of the market or travertine rocks), due to the presence of continuous perforations and the water absorption of these products, which are very high in travertine rocks, moisture or rain penetrates into these tissues and Due to freezing (cooling) the water in the tissues gets frozen (increasing the volume of water due to freezing) and causing cracks or fractures or separation from the body and so on.
این محصول جهت نصب سنگهای آنتیک طبیعی و مصنوعی، سنگهای ساختمانی، کاشی و سرامیک کف و دیواره و ... بر روي ديوارهاي آجري ، سيماني ، ديوارهاي پيش ساخته و ديوارهايي كه با رطوبت در تماس هستند ، جهت داخل و بیرون ساختمان مورد است.فاده قرار می گیرد. این چسب با افزودن آب ، معادل حداکثر درصد وزن خود ، حالت خمیری پيدا کرده و آماده مصرف مي گردد . چسب کاشي پودري ، بهترین گزینه برای دیوارهای سیمانی و آجري در معرض رطوبت مستقیم و باران می باشد
Presentation of a traditional and automatic production line of artificial stone Quartz quarts artificial stone (two-way automatic production line of artificial marble and quartz with a production capacity of to square meters) for the production of sheets and stones of covetous caverns with vibrating press system of vacuum-sab, sink Quartz vibe press vakuum-sab, artificial gravel with vibe press vacuum system, flooring, elevators and interior flooring in slabs and smaller dimensions ...
* Note: Some companies have introduced a very low loading and gradient loading system, as well as a low-volume hopper profile to reduce the amount of sheet consumed, the production of a rail system with very poor spectacle characteristics and low maintenance without preserving , The lack of use of the gearbox at the top and cost for the horizontal space of the upper part and the installation of the engine in the bottom of the rail system, loading solids and .... In this case, some of the solids will not enter into the mixer when it falls into the mixer, and it will not be fully loaded, and will slow down due to the poor profile of the rails. The loaded angle should be between and degrees in the rail system. For example, in order to load at a height of meters, the mixer should have an angle of meters and should be used with a heavy -stroke