درهای ترک به دو دسته وارداتی و مونتاژی تقسیم میشوند. درهای وارداتی که قیمت بالایی دارند در ترکیه ساختهشده و وارد ایران میشوند؛ اما درهای نوع دوم با واردات مواد خام مثل رویه MDF و سایر ابزار درهای ضد سرقت در داخل ایران مونتاژ میشوند.
Eyelet is one of the necessary tools for the entrance door of the apartment. The anti-theft door is no exception to this rule, and all the anti-theft doors in the market have eyes. Unless the manufacturer of the anti-theft door does not install this part on the door at the discretion of the buyer and the orderer. The body of the eye is made of aluminum or plated iron. A glass lens with a viewing angle of degrees is installed in the front part of the lens. The size of eyelet required for anti-theft door is usually cm. In cases where the raised designs are created on the door, probably due to the increase in the diameter of the door, there is a need to close the interface between the two eye parts.
This type of lock must be used with a lock cylinder (lock hub). Regarding Iranian anti-theft door lock brands, unfortunately, some manufacturers use low-quality cylinders in order to lower the total price of the anti-theft door; Unfortunately, despite the good quality of locally produced locks, the use of these types of inferior cylinders causes the safety of the doors to decrease, and the poor performance of the lock system.
It is customary to use doorknob or door knocker for Iranian anti-theft doors. These knockers have various designs and colors, and its efficiency is to create beauty in the door, to knock on the door and inform the residents. Anti-theft door knockers should usually be set with handles to create the necessary harmony and beauty. This piece, like the fixed handle, has a great effect on the beauty of the anti-theft door. Types of anti-theft door knockers made of aluminum, iron, and lead are available in the Iranian market.
یکی از مهم ترین نکاتی که باید به آن دقت کرد این است. که نوع رویه درب ضد سرقت نصب شده با مکان نصب شده همخوانی داشته باشد. در واقع قبل از انتخاب مدل درب باید بررسی و تحقیقات لازم انجام شود که درب ضد سرقت با چه نوع رویه ای برای ساختمان مناسب است.. پس از کسب اطلاعات در مورد این مسئله می توان نسبت به انتخاب مدل دلخواه با رویه مناسب اقدام نمود. برای مثال تابش نور خورشید به رویه پی وی سی (PVC) باعث بادکردن روکش و جدا شدن آن از لایه های زیرین درب می شود. از این رو نصب این مدل محصولات در مکان هایی که در معرض تابش مستقیم نور خورشید قرار دارند به هیچ وجه توصیه نمی شود.