If you have textured side walls along the stairs, don’t skip a bit to pop it up. It could be a brick wall, stoned wall, or paperwork patterns; the option for highlighting them is endless. You can mount the LED strips in the upper walls outlining the ceiling area or the bottom wall lining the foot area. This will highlight the wall’s textures, enhancing the space’s appearance. You can also try mounting LED strips from both sides of the walls in a vertical direction. Such lighting will not only bring out the wall patterns but also create an illusion of space and make your stair area appear more prominent.
The IP rating is a crucial factor to consider when purchasing LED stripes for any kind of application. The rating will vary depending on whether you are installing the LED strip on an indoor stair or outdoor stair. IP rating determines the degree of protection against ingress. If you plan to install LED strips for indoor stairs, a lower IP rating of IP or above will work. Again, for outdoor stair lighting, a higher IP rating of IP or IP or higher is most effective.
Once you have cleaned the stair, take a measuring tape and determine how many strips are required for the installation. For instance, if you are installing LED strips below each step, measure the length of each step and cut the strip accordingly. You will find cut marks in the strip; use scissors and cut following the mark. In case you make a wrong cut, don’t panic. You can quickly join them back using the
The IP rating is a crucial factor to consider when purchasing LED stripes for any kind of application. The rating will vary depending on whether you are installing the LED strip on an indoor stair or outdoor stair. IP rating determines the degree of protection against ingress. If you plan to install LED strips for indoor stairs, a lower IP rating of IP or above will work. Again, for outdoor stair lighting, a higher IP rating of IP or IP or higher is most effective.
LED strips come with an adhesive backing which makes the installation quick and simple. All you need to do is clean the stairs, target the area, remove the adhesive backing, and press it to the stair- that’s it! However, for extra protection, especially for outdoor stairs, you can go for clipping or use aluminum channels. Thus, installing LED strips on stairs is super easy; you don’t need to call an electrician. For more information, you can check