Azar Barzin G. Sepahan Company, year in a land with an area of thousand square meters and infrastructure of square meters with the aim of producing all kinds of PVC pipes and fittings from size to mm, in order to be used in sewage and water supply, telecommunications, electricity and A building was built. This company produces pp (polypropylene) pipes and fittings from size to mm for construction, urban, industrial, sanitary water supply and central heating installations and the transfer of chemicals, acids and compressed air in its production line.
Unplasticized Polyvinyl Chloride: PVC pipe is produced without any softener and therefore has higher resistance and less friction with the material. This product is often used for various pipes and fittings, transfer of drinking water in areas with different topographic conditions, drainage and even sewage transfer. Low price, excellent mechanical properties, extraordinary resistance to chemicals are among the significant advantages of this unbreakable pipe that can attract the attention of any company.
Hydraulic pipes are generally divided into two categories: pressure pipes (under pressure) and non-pressure pipes (sewage). Vinoplastik Company is one of the leading manufacturers of these piping systems in the country, which provides its products to customers using the latest tools and using strong materials such as UPVC. PVC pipes and fittings have very good resistance to fluids containing chemicals and at the same time have little friction with different materials. In addition, the weight of these pipes is very low and they are transported as easily as possible. The use of UPVC in municipal water transmission networks as well as sewage under compressed and non-compressed piping has proven its efficiency well.
() Because of the characteristics of the conical screw, the feeding section has a large diameter, and the heat transfer area and shear speed of the material are relatively large, which is conducive to the plasticization of the material. The screw diameter of the metering section is small, reducing the heat transfer area and the shear speed of the melt, so that the melt can be extruded at a lower temperature.
In order to determine the overall change in static pressure of liquids and fluids as they flow along a large tube, all three components of the Bernoulli equation must be considered separately and then combined. Changes in the height or slope of the pipe may cause a pressure drop. Similarly, a change in fluid velocity can increase the pressure and vice versa. The net effect of these currents depends on the relative magnitude of these changes.