Usually, the lifetime of Carrogate pipes is estimated to be , and even years, which depends on the raw materials, production conditions, storage and maintenance of the pipe. Note that in cases where the pipe must be buried and withstand environmental conditions, there are things that must be considered when installing the pipe. In relation to Carrogate pipes, soil pH should be taken into consideration. Carrogate pipes produced from polyethylene have been used for about half a century due to the impossibility of settling, rotting, easy installation and resistance to soil movement and pressure. The technical specifications and quality of Carrogate double-walled pipe must comply with the standard DIN- (related to the control of pipe dimensions and annular strength) and EN (other tests related to product quality specifications).

Carogit pipes are produced in different sizes in the form of Carogit pipes and Carogit spiral pipes, which in fact only the production method is different in that in the production of Carogit pipes, polyethylene material is molded and pressed in one piece, but in the production of pipes. Spiral carogit production method is very different. In this method, the profiles or the protrusions on the pipe are cooled by the extruder that produces the pipe profiles after cooling and passing through the water inside the tub, and it is gradually rolled in a spiral and glued together by a series of interactions. After gluing the inner layer of the tube, which is yellow, it sits on the inner wall of the tube and on the profiles and is glued on the tube by defined high pressure pulleys. These pipes are usually produced in high sizes, ie from to . The sizes of corrugated and spiral corrugated pipes are:

_

_