در سال محققان دریافتند البسه ی حاوی لایکرا زیست سازگار نبوده و مشکلات زیست محیطی زیادی به همراه دارند. تاثیر منفی این الیاف بیشتر از سایر الیاف مصنوعی است.. الیاف مصنوعی دیگری نظیر نایلون از منابعی مانند نفت یا ذغال سنگ تهیه میشوند اما الاستان به صورت کامل در آزمایشگاه سنتز میشود. اگر برای تولید آن از منابع تجدیدپذیر است.فاده شود، مشکلات زیست محیطی آن کمتر خواهد شد.

Licensed by E.I. Du Pont De Nemour based in the US, Acrylic Factory #   has been producing Acrylic Fibers in Iran for three decades. The major monomers used in the production of acrylic fibers are acrylonitrile (AN), methylacrylate (MA) or vinyl acetate (VA). The acrylic fibers from Acrylic Fiber Factory # are produced using Slurry Polymerization and Dry Spinning. The fibers from Acrylic Factory # can be produced with a detex of .- dtex and a cut length of - mm and can also be produced variously on a customized basis. The factory is also capable of producing microdenier fibers. Good tenacity and uniform dyability are among their other outstanding characteristics. The production technology as well as the overall, physical and mechanical characteristics of the fibers is such that they have placed them in the Dralon products by Bayer, Germany. The following are some of the characteristics of our product:

Our acrylic fibers are produced using monomer acrylonitrile as the major monomer (over %), methylacrylate or vinyl acetate as the second comonomer (less than %) and a third comonomer for dyability, by solution polymerization and Wet Spinning using SNIA technology. In both dull and semi-dull product, Titanium Dioxide (max .%) is used. Also, in the process of production, the fibers are submerged in finish (finish of about .%) prior to packing. The following are some of the major characteristics of our products:

Consistent with SNIA technology, the production process for this product starting with the mixing of monomers as feedstock input to the reactors for polymer solution in Dimethylformamide (DMF) in the Chemical Area through to fiber production, drawing, finishing and packaging is continuous at that each stage, samplings and controls are conducted and finally the product is graded and released in accordance with the test results.

محصولات ساخته شده توسط تجهیزات ورق PSP JWELL در زمینه صنایع غذایی، بسته بندی و دکوراسیون که تجهیزات اصلی ظروف PS Foamed می باشد، کاربرد فراوانی دارد. این دستگاه دارای مزایای عملکرد خوب، مشخصات عالی، پایداری بالا و ظرفیت خروجی بالا است..