به عنوان ماده اولیه برای تولید زنجیر اصلی این پلیمر از دو نوع پیش پلیمر ماکروگلایکول انعطافپذیر (flexible macroglycol) و دی ایزوسیانات سخت (stiff diisocyanate) می توان است.فاده کرد. این ماکروگلایکول می تواند پلی است.ر، پلی اتر، پلی کرنات و یا ترکیبی از آن ها باشد. پلیمرهای مطرح شده پلیمرهای بلند زنجیر با گروه های هیدروکسیل در دو انتهای خود هستند و مهمترین ویژگی آن ها بلند و انعطاف پذیری آن هاست. دی ایزوسیانات دارای زنجیر کوتاه تری بوده و در دو انتهای خود دارای گروه ایزوسیانات است. و همین باعث سختی آن میشود و است.حکام زنجیر را به دنبال دارد.
Licensed by E.I. Du Pont De Nemour based in the US, Acrylic Factory # has been producing Acrylic Fibers in Iran for three decades. The major monomers used in the production of acrylic fibers are acrylonitrile (AN), methylacrylate (MA) or vinyl acetate (VA). The acrylic fibers from Acrylic Fiber Factory # are produced using Slurry Polymerization and Dry Spinning. The fibers from Acrylic Factory # can be produced with a detex of .- dtex and a cut length of - mm and can also be produced variously on a customized basis. The factory is also capable of producing microdenier fibers. Good tenacity and uniform dyability are among their other outstanding characteristics. The production technology as well as the overall, physical and mechanical characteristics of the fibers is such that they have placed them in the Dralon products by Bayer, Germany. The following are some of the characteristics of our product:
Consistent with SNIA technology, the production process for this product starting with the mixing of monomers as feedstock input to the reactors for polymer solution in Dimethylformamide (DMF) in the Chemical Area through to fiber production, drawing, finishing and packaging is continuous and that at each stage samplings and controls are conducted and finally the product is graded and released in accordance with the test results. Bright, dull and semi-dull products are normal products. The product is packaged in bales weighing ± kg and then put in covered polypropylene jute and rod guards. The bales measure ** mm. - tons of the product can be transported in a -foot container.
In textile industries, a major need is for a combination of different detexes of fibers to achieve optimal conditions for yarn production. Following numerous studies, to realize the customer-centeredness motto, Acrylic Plant # obtained the patent and production license for these fibers. Presently production of these fibers runs in two mixes of . and . detexes of % and % and that of mixed fibers run in . and decitexes of %. The major advantages of the combination and mixing of these fibers are:
Consistent with SNIA technology, the production process for this product starting with the mixing of monomers as feedback input to the reactors for polymer solution in Dimethylformamide (DMF) in the Chemical Area through to fiber production, drawing, finishing and packaging is continuous and that at each stage samplings and controls are conducted and finally the product is graded and released in accordance with the test results. Bright, dull and semi-dull products are normal. The product is packaged in bales weighing ± kg and then put in covered polypropylene jute and rod guards. The bales measure ** mm. - tons of the product can be transported in a -foot container.