Like other manmade fibers, polyester fibers are produced using industrial methods and because of their properties are good substitutes for such natural fibers as cotton. This product is made by combining dimethyl terephthalate, monoethylene glycol or terephthalic acid (substitute for the raw material dimethyl terephthalate) in the vicinity of good catalysts. Titanium dioxide is used to make the product look semi-dull. Also, in the production process, the product is submerged in finish (of about .%) prior to packaging. The following are some of the major characteristics of this product.
Our acrylic fibers are produced using monomer acrylonitrile as the major monomer (over %), methylacrylate or vinyl acetate as the second comonomer (less than %) and a third comonomer for dyability, by Solution Polymerization and Wet Spinning using SNIA technology. In both dull and semi-dull product, Titanium Dioxide (max .%) is used. Also, in the process of production, the fibers are submerged in finish (finish of about .%) prior to packing. The following are some of the major characteristics of our products:
Our acrylic fibers are produced using monomer acrylonitrile as the major monomer (over %), methylacrylate or vinyl acetate as the second comonomer (less than %) and a third comonomer for dyability, by solution polymerization and Wet Spinning using SNIA technology. In both dull and semi-dull product, Titanium Dioxide (max .%) is used. Also, in the process of production, the fibers are submerged in finish (finish of about .%) prior to packing. The following are some of the major characteristics of our products:
Polybest fibers are acrylic fibers replacing asbestos in the preparation of concrete, asphalt, corrugated false ceiling, etc. The cut lengths of this fiber ranges from to mm and their physical and chemical properties differ from those of standard fibers and customized fibers are also produced. The acrylic fibers needed for these products are produced by solution polymerization, wet spinning and SNIA technology using monomer acrylonitrile as the major monomer. Production of this fiber used in industry ranges from . to . dtex and a length of - mm.
دستگاه های جوش چرخشی- اصطکاکی شرکت KLN و Mecasonic مجهز به سروو موتور و تکنیک های مدرن کنترل بوده و بالاترین دقت و کارایی را در جوش قطعات با سطح مقطع دایره ای و متقارن ارائه می دهد. شرکت میلاد فراصوت همکاری نزدیکی با دو شرکت KLN آلمان و Mecsonic فرانسه داشته و آماده خدمت رسانی در زمینه تامین انواع تجهیزات جوش چرخشی می باشد.