Like other manmade fibers, polyester fibers are produced using industrial methods and because of their properties are good substitutes for such natural fibers as cotton. This product is made by combining dimethyl terephthalate, monoethylene glycol or terephthalic acid (substitute for the raw material dimethyl terephthalate) in the vicinity of good catalysts. Titanium dioxide is used to make the product look semi-dull. Also, in the production process, the product is submerged in finish (of about .%) prior to packaging. The following are some of the major characteristics of this product.
Consistent with SNIA technology, the production process for this product starting with the mixing of monomers as feedstock input to the reactors for polymer solution in Dimethylformamide (DMF) in the Chemical Area through to fiber production, drawing, finishing and packaging is continuous at that each stage, samplings and controls are conducted and finally the product is graded and released in accordance with the test results.
یک خط اکستروژن ورق شامل یک اکسترودر (دو یا تک پیچ)، مجهز به تعویض صفحه نمایش به علاوه یک پمپ دنده، و به دنبال آن یک میکسر است.اتیک (گاهی اوقات یک بلوک تغذیه کواکستروژن که قبل از یک یا چند مجموعه اکسترودر اضافه شده است.، همانطور که قبلا توضیح داده شد) است.. ، تغذیه یک صفحه سطح منقضی می شود.
در سال محققان دریافتند البسه ی حاوی لایکرا زیست سازگار نبوده و مشکلات زیست محیطی زیادی به همراه دارند. تاثیر منفی این الیاف بیشتر از سایر الیاف مصنوعی است.. الیاف مصنوعی دیگری نظیر نایلون از منابعی مانند نفت یا ذغال سنگ تهیه میشوند اما الاستان به صورت کامل در آزمایشگاه سنتز میشود. اگر برای تولید آن از منابع تجدیدپذیر است.فاده شود، مشکلات زیست محیطی آن کمتر خواهد شد.
Our acrylic fibers are produced using monomer acrylonitrile as the major monomer (over %), methylacrylate or vinyl acetate as the second comonomer (less than %) and a third comonomer for dyability, by solution polymerization and Wet Spinning using SNIA technology. In both dull and semi-dull product, Titanium Dioxide (max .%) is used. Also, in the process of production, the fibers are submerged in finish (finish of about .%) prior to packing. The following are some of the major characteristics of our products: