در چند سال گذشته، شرکت ما فناوری های پیشرفته را هم در داخل و هم در خارج از کشور جذب و هضم کرد.در همین حال، شرکت ما تیمی از متخصصان را تشکیل میدهد که به توسعه چین اختصاص داده شدهاند، چاپگر رول به رول خودکار جدید رول به رول برای چاپ لیبل چند رنگ، ما اکنون موجودی بزرگی برای پاسخگویی به درخواستها و نیازهای مشتریان خود داریم.
If you want an automatic silk screen printing machine to make your printing work easier, faster and with less fatigue, you can use the M, T, W, and T conveyor models, which are priced from approximately million, million, million and million and set dryers for them can be from electric models million Tomans, million Tomans and low consumption gas dryers million Tomans.
About the sound of the silk screen printing machine: It has no special noise and has less noise than the industrial sewing machine. But the air compressor that you prepare for the device has a sound like the sound of a motorcycle when it automates and turns on, depending on the type of compressor, and after filling the tank, it turns off again from the compressed air. If this sound is a problem for you, you can use wood and sound insulation to make a muffler box for your air compressor at a low cost.
از آنجایی که با است.فاده از فیلامنت PLA ابریشم (Silk PLA) با قطر .mm ساخت شرکت Y.S (یوسو) میتوان از چاپ خود لذت برد و طرحهای سخت و پیچیده را به سادگی و با کیفیت بالا پرینت کرد، نظر شما راجع به سایر قابلیتهای این محصول چیست؟ دیدگاه خود را با ما در میان بگذارید.
No, you definitely should not get a dryer! But note what you need to do without a dryer to dry a large print run Or you should have a good room space where you can pull the rope. Or you should spread the items on the floors of a hand dryer or table. This material has two main disadvantages. First, a lot of time is wasted for the printed material to dry. Second, you need an extra workforce to pick up and flatten the print. In any case, if you can not afford to buy a dryer at the beginning, you can use these methods. But if you have a rail dryer, you can place your media on the conveyor of the dryer after printing so that the dryer pulls it into the tank and after drying, directs it out of the machine on the other side.