No, you definitely should not get a dryer! But note what you need to do without a dryer to dry a large print run Or you should have a good room space where you can pull the rope. Or you should spread the items on the floors of a hand dryer or table. This material has two main disadvantages. First, a lot of time is wasted for the printed material to dry. Second, you need an extra workforce to pick up and flatten the print. In any case, if you can not afford to buy a dryer at the beginning, you can use these methods. But if you have a rail dryer, you can place your media on the conveyor of the dryer after printing so that the dryer pulls it into the tank and after drying, directs it out of the machine on the other side.
Silk screen printing is a non-face-to-face service and is usually not urgent. For this reason, silk screen printing can be chosen as a second and part-time job, which can be done even at night and during overtime. However, personally, based on the experience of long sales of silk screen printing machines and setting up silk printing workshops throughout the country and even exporting to neighboring countries, I believe that due to the prosperity of this work and the wide market of silk screen printing, this job is considered as the main job. Starting as a second or part-time job in silk screen printing, this became their main occupation and they expanded their printing workshop.
Due to the above two factors, the dryers of Tak Pak Company in models with different sizes and the possibilities of controlling the speed of the conveyor and controlling the temperature and the temperature inside the tank can dry your printed material. You should pay attention to how much heat your print material can withstand With the guidance of single pack technicians, you can choose the right dryer for you.
Regarding the color smell of silk screen printing machine, I have to offer you that different colors are used for printing on different materials and different color solvents can be odorless and odorless. For example, PVC dye used for nylon printing is used as a retarder solvent to loosen its dye, which has a special odor. Due to the quality of the dye and the retarder can be purchased at a higher cost without dye and solvent. Water-based paints are usually odorless and are mostly used on fabrics and cartons. Colors of polyethylene, pigment, plastisol, Div, Marabou, latex, harvest, all kinds of bases .. certainly have their own solvents, some of which have a specific odor and some are odorless. Also, never forget a fan for proper air conditioning in your silk screen printing workshop.
First of all, due to the high circulation of daily printing, traditional printing methods in terms of manpower can not meet the needs of a silk screen printing house. Also, the level of print quality due to a constant pressure of the spatula and squiggle with a constant pressure and the constant angle of the scotch spade according to the speed adjustment of the reciprocating system of the printing set according to the users choice for different printing media Does not have much higher. The next case is to reduce the manpower used in the printing process, which reduces the cost of printing due to the competitive price of printing in the market.