First of all, due to the high circulation of daily printing, traditional printing methods in terms of manpower can not meet the needs of a silk screen printing house. Also, the level of print quality due to a constant pressure of the spatula and squiggle with a constant pressure and the constant angle of the scotch spade according to the speed adjustment of the reciprocating system of the printing set according to the users choice for different printing media Does not have much higher. The next case is to reduce the manpower used in the printing process, which reduces the cost of printing due to the competitive price of printing in the market.
Compressor or air pump suitable for single pack silk screen printing machine can be to liters with bar power. The higher the liter of the compressor or the larger the tank, the later it will automatically turn on and turn on and start refilling the pump. Air compressors are available in two models, standing and lying down, which you can choose according to the amount of work space. Standing compressors take up less space.
But you should note that each job needs its own expertise and just by having a silk screen printing machine, you can not get a suitable and competitive printing without having the knowledge and experience of this job. , Calendars and receipts, sacks, etc. are easily possible with a few exercises. Printing clothes due to high sensitivity and having different conditions, such as considering the type of fabric, the right color for that type of fabric, proper substructure, drying with the right dryer requires knowledge and experience that beginners who are just starting to work They can start from easier levels and gradually print clothes by gaining experience.
پرینت طرحهای زیبا با فیلامنت PLA ابریشم (Silk PLA) پرینتر سه بعدی با قطر .mm ساخت شرکت Y.S سبب شده کاربران خوش ذوق و زیبا پسند این محصول را نسبت به سایر فیلامنتها ترجیح دهند. کیفیت مناسب، سطح شفاف و درخشان پس از پرینت، انعطاف پذیری بالا و غیره موجب شده علاوه بر است.فاده در پرینترهای سه بعدی، در پروژههای هنری، صنایع دستی، ساخت گلدان و غیره طرفداران زیادی به خود اختصاص دهد. جنس PLA با توجه به اینکه از مواد تجدید پذیری مانند نیشکر و ذرت تهیه میشود بنابراین این مورد مضاف بر موارد ذکر شده محبوبیت این فیلامت را دو چندان کرده است..
No, you definitely should not get a dryer! But note what you need to do without a dryer to dry a large print run Or you should have a good room space where you can pull the rope. Or you should spread the items on the floors of a hand dryer or table. This material has two main disadvantages. First, a lot of time is wasted for the printed material to dry. Second, you need an extra workforce to pick up and flatten the print. In any case, if you can not afford to buy a dryer at the beginning, you can use these methods. But if you have a rail dryer, you can place your media on the conveyor of the dryer after printing so that the dryer pulls it into the tank and after drying, directs it out of the machine on the other side.