If you want an automatic silk screen printing machine to make your printing work easier, faster and with less fatigue, you can use the M, T, W, and T conveyor models, which are priced from approximately million, million, million and million and set dryers for them can be from electric models million Tomans, million Tomans and low consumption gas dryers million Tomans.

No, you definitely should not get a dryer! But note what you need to do without a dryer to dry a large print run Or you should have a good room space where you can pull the rope. Or you should spread the items on the floors of a hand dryer or table. This material has two main disadvantages. First, a lot of time is wasted for the printed material to dry. Second, you need an extra workforce to pick up and flatten the print. In any case, if you can not afford to buy a dryer at the beginning, you can use these methods. But if you have a rail dryer, you can place your media on the conveyor of the dryer after printing so that the dryer pulls it into the tank and after drying, directs it out of the machine on the other side.

Silk-screen printing machines enable monochrome printing in one step on flat or circular surfaces. It is a larger sample that, in addition to having all the features, also has the ability to print on larger surfaces. This model can be used for local UV printing, printing on large bottles and gallons, porcelain flowers, printing adhesive back labels, cardboard and large handbags. Multi-purpose silk printing machine, flat and circular printing capability, pneumatic control of printing speed, continuous printing capability and printing time adjustment, three-language digital display screen, equipped with a microprocessor.

پرینت طر‌ح‌های زیبا با فیلامنت PLA ابریشم (Silk PLA) پرینتر سه بعدی با قطر .mm ساخت شرکت Y.S سبب شده کاربران خوش ذوق و زیبا پسند این محصول را نسبت به سایر فیلامنت‌ها ترجیح دهند. کیفیت مناسب، سطح شفاف و درخشان پس از پرینت، انعطاف پذیری بالا و غیره موجب شده علاوه بر است.فاده در پرینتر‌های سه بعدی، در پروژه‌های هنری، صنایع دستی، ساخت گلدان و غیره طرفداران زیادی به خود اختصاص دهد. جنس PLA با توجه به اینکه از مواد تجدید پذیری مانند نیشکر و ذرت تهیه می‌شود بنابراین این مورد مضاف بر موارد ذکر شده محبوبیت این فیلامت را دو چندان کرده است..

Due to the above two factors, the dryers of Tak Pak Company in models with different sizes and the possibilities of controlling the speed of the conveyor and controlling the temperature and the temperature inside the tank can dry your printed material. You should pay attention to how much heat your print material can withstand With the guidance of single pack technicians, you can choose the right dryer for you.