If your building has several boilers, you need to estimate whether you really need to put the boilers in standby mode (at pressure and temperature), as this will waste energy. The stand-by boiler not only interrupts the cycle but also releases heat to the surrounding environment during the loss of radiation, which significantly increases the boiler input power while reducing ignition. Give. At low ignition values, for example, when the boiler is maintained in standby mode, the efficiency drop can reach %. Maintaining the standby state of the boiler will cause a quick recovery in case of failure of the previous boiler, but this action must be measured by the huge and useless consumption of energy. If you do not need a boiler in standby mode in your activity or you only need it in certain seasons, you must turn off all the boilers that you do not need to prevent energy loss.

Steel boilers, as their name implies, are made of steel and are usually made of horizontal cylinders. Steel boilers have a combustion chamber in which pipes are placed around this chamber. The pipes that are installed around the combustion chamber of steel boilers are made of a special alloy so that they do not burn or damage in the face of a direct flame. These pipes are called (fire pipes). Steel boilers are divided into friends from the point of view of heat transfer, which are as follows.

Leaks may occur in the hot water distribution system. This leakage increases the water and energy consumption of the system as well as the damage caused by the water leakage. Compensation water must be provided for the hot water and steam distribution system to replace the steam and water lost through the leak. This is an easy solution to ensure there is permanent water in the system. It is best to install a measuring device on the system compensation line. The measuring device should be checked weekly for unexpected system water loss.

Modular boilers are small in size and capacity and are usually used to replace several small boilers instead of one large boiler. These modular boilers pass through standard ports and are portable through stairs and elevators. These devices can be arranged in different order to make the most of small places or embed other equipment in those places. These boilers can efficiently provide the required heating load.

Steel boilers, as their name implies, are made of steel and are usually made of horizontal cylinders. Steel boilers have a combustion chamber in which pipes are placed around this chamber. The pipes that are installed around the combustion chamber of steel boilers are made of a special alloy so that they do not burn or damage in the face of a direct flame. These pipes are called (fire pipes). Steel boilers are divided into friends from the point of view of heat transfer, which are as follows.