But why does water in the brake fluid limit the braking effect so much The new water entering the brake fluid has a lower boiling point compared to the existing fluid, which reduces the boiling point of the entire brake fluid as the mixing ratio increases. If the boiling point of the brake fluid is now reached during braking, vapour bubbles form in the brake system which are caused by the boiling of the brake fluid. As a result, hydraulic pressure is no longer generated on the brakes and the pedal fails during braking without producing a braking effect.
خط ترمز به دماهای بالا حساس است.، بنابراین مقدار مشخصی تبخیر و تراکم در داخل خط رخ می دهد. با تداوم این امر، محتوای آب در خطوط با شروع رقیق شدن روغن ترمز افزایش می یابد. TASI Universal LED Car Brake Fluid Tester یک تستر جیبی با کاربری آسان است. که برای تشخیص آلودگی آب در خطوط ترمز خودرو است.فاده می شود. تستر برای DOT ، و . مناسب است..
Different brake fluids differ in their properties. These include the boiling point properties. To be able to map these differences, brake fluids are classified according to DOT values. The higher the DOT value of a brake fluid, the higher its boiling point. A distinction is also made here between the dry boiling point and the wet boiling point. The dry boiling point is the boiling point of the new fluid not yet in the vehicle. The wet boiling point, on the other hand, is the boiling point that is present at the end of the brake fluid´s service life when the water content in the fluid has risen to approx. .%. In addition, the general rule is that the brake fluid should be renewed every two years for safety reasons. With a brake fluid tester from RP-TOOLS, the time at which a change is necessary can be determined more precisely.
- اگر مقدار بین ~ درصد باشد، با نور پس زمینه سبز نشان می دهد و مایع ترمز می تواند به طور معمول است.فاده شود. اگر بین تا درصد باشد، با نور پس زمینه زرد نشان داده می شود و صدای زنگ آهسته منتشر می کند که نشان دهنده نیاز به تعویض روغن ترمز است..
For brakes to function properly, regular brake fluid changes are very important for the safety of a motor vehicle. This maintenance work must be carried out with special care and cleanliness, as even the smallest impurities, such as dirt or small parts, can get into the brake system and damage the brake pistons, for example. So-called brake fluid testers are suitable for determining whether it is necessary to change the brake fluid in a vehicle. These provide reliable information as to whether the brake fluid in a vehicle is still ok or whether it needs to be changed. Depending on the model, the brake fluid tester determines the current boiling point of the brake fluid in the vehicle or the water content of the fluid.