Providing security and beauty of the building or any other place is one of the most important points. In the past, stone and brick were used more for the facade of the building, and of course, these did not give a special beauty and effect to the building. In recent years, when different glasses entered the market, there was a fundamental change in the facades of buildings. One of them is laminate. In addition to being very beautiful due to its beautiful design, this glass has a very good resistance. These glasses are in terms of impact and are resistant to storms, snow, impact, etc. Therefore, buying laminated glass has a great impact on the beauty of your building.

Annealed glass breaks easily. Although tempered glass is more strengthened than annealed glass, it breaks also under high stress or impact. Nevertheless laminated glass (V-Lam), which is composed of two glass layers and a PVB (Poly-Vynil Butyral) interlayer, benefits higher levels of impact resistance. A wide range of V-Lam glass can be produced by changing number of glass layers and interlayer thickness to meet different operational requirements.

The issue of security with security glasses was not completely eliminated, because in case of attack in disturbances or thefts, these windows easily allow the intruders to break and pass. Also in the automotive industry, the insecurity of glass (especially windshield) in accidents has been a serious problem. Spanta Glass Glass Factory, as a glass manufacturer with the most up-to-date tools and experienced specialists, tries to improve the quality level of this product throughout the country. To buy laminated glass, you can get help from Spanta Glass with the most suitable price and the highest quality.

Any drilled holes must be the same size or greater than the thickness of your glass selected. (For example mm glass can only have a hole of mm in diameter or greater). Drilled holes must be within reasonable distance from edge of the glass or other holes / cut-outs to prevent breaking when toughened. A customer service representative will contact you regarding your exact requirements if needed.

Any drilled holes must be the same size or greater than the thickness of your glass selected. (For example mm glass can only have a hole of mm in diameter or greater). Drilled holes must be within reasonable distance from edge of the glass or other holes / cut-outs to prevent breaking when toughened. A customer service representative will contact you regarding your exact requirements if needed.