Autoclave blocks are a very good thermal insulator, which increases the need to use these products in the field of construction. These modern structures are produced in such a way that it can even be used without an insulation layer. But it is always recommended to use that insulation layer in construction using these blocks. In addition, autoclaved blocks have a unique feature that has made them attract more attention.
به دلیل مقاومت زیاد، نفوذناپذیری حرارتی و رطوبتی و نیز سبک بودن فوم بتن، بهترین روش برای شیب بندی پشت بام است.فاده از فوم بتن در جهت ایجاد شرایط مناسب می باشد که می توان بعد از اجرای فوم بتن در پشتبام، مستقیم و بی هیچگونه عملیات اضافی بر روی آن ایجاد عایق بندی با ایزوگام نمود.
One of the most important issues that is considered in the selection of blocks for the construction industry is the resistance of this structure against external and internal conditions and factors. Autoclaved blocks are among the products that have high resistance compared to other similar materials. These types of products are more resistant than concrete blocks and are almost a strong competitor in the construction industry for these old structures.
The use of light gas concrete is approved by the building and housing research center. This block has unique compositions. The material of this block produces calcium silicate and hydrated aluminum molecules. which is transformed into Tobermorite in the pressure and heat resulting from high humidity. This material is a type of crystalline material that exists in the earths environment and increases the strength and stability of the block.
AAC blocks, or autoclaved blocks, are produced in such a way that there is a lot of empty space between them, and because of this, these products are light in weight and very efficient, because light weight construction materials make workers laborious. Dont take too much time to transport these blocks and as a result work efficiency will increase. With these conditions, the speed of the workers also increases.